Product Description
Deep Cycle life 12V 30Ah UPS Replacement Battery For UPS , Solar System And UPS
Specifications:
| Item |
Parameter |
Remark |
| Rating Voltage |
12V |
|
| Capacity |
Typical:20Ah |
0.2C discharge after full charge.. |
| Charge Voltage |
12.6V |
|
| Impedance |
80mΩ(Max) |
|
| Charging Mode |
C.C/C.V. |
Constant Current
/Constant Voltage
|
| Charging Metho |
Standard Charging 0.2C |
Charging Current 4000mA |
| Charging Time |
Standard Charging |
(5-6)Hours |
|
|
End of Discharge
Voltage
|
9.0V |
|
| Maximum size battery pack |
86mm*70mm*155mm |
|
| Operating Temperature |
Charging |
0～45℃ |
|
|
Discharging
|
(-20～60)℃ |
| Storage Temperature |
(-10℃～35)℃
Recommend(25±5℃)
|
Storage capacity should be 40%~50% full charge capacity |
| Cycle Life |
1000 cycle |
0.5C charge and discharge |
A UPS battery is short for uninterruptible power supply. It is designed to be used with various electronics, especially computers and telecom systems where a power outage could potentially be catastrophic, it’s actually be used on numerous industry in your home and business .
Battery pack Performance:
1, Longer Cycle Life: the capacity can stay 80% min after Over 2000 cycles
2, Lower cost : the longer cycle life can balanced the cost of the battery than the lead-acid battery ,can save the cost
3, without Memory Effective: Always ready for charge and use, without need to charge again after a full discharge.
4, Wide working Temperature ranges: can be used in the temperature ranges from -20° C to 65° C
5, Intelligent Charge System: Voltage of each battery can be detected and protected against overcharge, overvoltage, short circuit and overheat and balanced function, can read out the capacity of each cells
Applications:
1.Pure and hybrid electric car, electric bus , electric vehicles , recreational vehicles
2.solar and wind energy storage , solar streetlights ,household energy storage
3.communication base station and utility power supply ,emergency power supply
Shipment :
1. Based on the character of cell, need to make an environment for transportation of LiFePO4 battery pack
2. Battery should be keep at -20°C~45°C in warehouse where it’s dry, clean and well-ventilated environment .
3. when delivery , we must pay more attention :dropping, extrusion and serious stacking.
Your message must be between 20-3,000 characters!