3U Standard Size 2.2Kwh NMC ESS Battery For Home Energy Storage
Contact Person : Sophia Peng
Phone Number : +86-731-58567126
|Minimum Order Quantity :||1||Price :||Negotiation|
|Packaging Details :||Inner plastic material package ,wooded packaging outside||Delivery Time :||20-25 days|
|Payment Terms :||L/C at sight , T/T||Supply Ability :||300 pcs /day|
|Place of Origin:||China||Brand Name:||Soundon|
|Certification:||ROHS ,MSDS ,TLC certification,CE||Model Number:||SD-ES-4875|
|Standard Voltage:||48V||Standard Capacity:||75Ah|
|Battery Material:||NCM||Configuration:||Cell 3.2V15Ah ,13S1P Battery Module In Series|
ups power battery,
high capacity deep cycle battery
4U 48V75Ah NCM ESS Battery With UN38.3 ,UL For Telecom Power Supply
|Model||Rated Voltage||Rated Capacity||Size mm||Weight kg||Mark|
|Paralle/Series||Single Cell 3.6V15Ah,by 13S5P|
|cell over voltage alarm||4.10V|
|cell over voltage protection||4.25V|
|total voltage over voltage alarm||53.3V|
|total voltage over voltage protection||54.6V|
|Max discharge current||75A|
|Discharge over current protection||80A|
|Over-current detect delay time||1.0±0.5S|
|Cell over discharge alarm||3.2V|
|Cell under voltage protection||2.80V|
|Cell under voltage alarm||43.0V|
|Total voltage under voltage alarm||39V|
1. With high energy density, discharge voltage is stabilize, can lengthen the cycle life.
2. Integrated system: 13pcs battery models in series + BMS system+ standard Chassis
3.Rack installation dimension ,strictly refer to EIA,ETSI standard ,to meet with the way of the wall-mounted installation.
4.Module design, Multiple modules can be connected in parallel to increase the output power and capacity
5.Take the intelligent interrupt method function of charge and discharge ,can save the station electric costing
6.With full protection function (Overvoltage, Undervoltage, Short circuit ,Overload ,Overcurrent, Over-temperature, lower temperature ,Balance ,Sleeping)
7.Intelligent design, with Telemetering ,Telecommand ,Telecontrol,Teleadjusting function
8.With RS232 Upper interface and RS485 Cascade interface, according to the front-end smart device communication protocol to perform remote control and PC or control center communications.
9Can directly connect the original Lead-acid battery switch power system, just adjust the charge and discharge voltage and other parameters.
2. Communication interface functions
BMS can communicate with Level Control System by RS232. The upper computer can monitor cell voltage, current, temperature, status, SOC, SOH, etc. Below is installation method. Baud rate is 9600bps by default
It has double RS485 interface, suitable for multi PC communication when battery pack in parallels, reading related information, also can read account battery info via PC. Baud rate is 9600bps by default.
Indoor Distributor System , Integrated station system , Connectsite,Microcell station, FTTX equipment
,WLAN equipment ,RRU, distributed power supply and other telecom industry ,also can apply in Access
equipment , remote exchange multiplex, mobile communication equipment ,transfer equipment ,movement
emergence communication bus ,traffic and fire protection emergence communication system , satellite
earth station, Microwave communication equipment etc .