|Place of Origin:||China|
|Certification:||ROHS ,MSDS ,CE|
|Minimum Order Quantity:||5|
|Packaging Details:||Inner plastic material package ,wooded packaging outside|
|Delivery Time:||20-25 days|
|Payment Terms:||L/C at sight , T/T|
|Supply Ability:||300 pcs /day|
|Nominal Voltage ,capacity:||12V20Ah||Standard Capacity:||50Ah|
|Size:||175*166*126mm||End Of Discharge Voltage:||8.4V|
|Overcharge Current:||10A||Peak Current:||20A (<3)|
|Cycle Life:||>2000 Times||Warranty:||2 Years|
Deep Cycle life 12V 30Ah UPS Replacement Battery For UPS , Solar System And UPS
|Capacity||Typical:20Ah||0.2C discharge after full charge..|
|Charging Metho||Standard Charging 0.2C||Charging Current 4000mA|
|Charging Time||Standard Charging||(5-6)Hours|
End of Discharge
|Maximum size battery pack||86mm*70mm*155mm|
|Storage capacity should be 40%~50% full charge capacity|
|Cycle Life||1000 cycle||0.5C charge and discharge|
A UPS battery is short for uninterruptible power supply. It is designed to be used with various electronics, especially computers and telecom systems where a power outage could potentially be catastrophic, it’s actually be used on numerous industry in your home and business .
Battery pack Performance:
1, Longer Cycle Life: the capacity can stay 80% min after Over 2000 cycles
2, Lower cost : the longer cycle life can balanced the cost of the battery than the lead-acid battery ,can save the cost
3, without Memory Effective: Always ready for charge and use, without need to charge again after a full discharge.
4, Wide working Temperature ranges: can be used in the temperature ranges from -20° C to 65° C
5, Intelligent Charge System: Voltage of each battery can be detected and protected against overcharge, overvoltage, short circuit and overheat and balanced function, can read out the capacity of each cells
1.Pure and hybrid electric car, electric bus , electric vehicles , recreational vehicles
2.solar and wind energy storage , solar streetlights ,household energy storage
3.communication base station and utility power supply ,emergency power supply
1. Based on the character of cell, need to make an environment for transportation of LiFePO4 battery pack
2. Battery should be keep at -20°C~45°C in warehouse where it’s dry, clean and well-ventilated environment .
3. when delivery , we must pay more attention :dropping, extrusion and serious stacking.